09-16-2022, 07:29 PM
|
#4
|
|
Senior Member
Join Date: Jul 2011
Location: Redondo Beach, CA
Posts: 7,293
|
Re: Carburetor doesn't like my overhaul ...
Quote:
Originally Posted by amclass
I found that I can not only turn in the gas adjust needle completely, but also the air idle adjust valve and the engine continues to run at idle and only almost imperceptibly a little rougher.
|
The GAV doesn't really have much influence at idle.
If you can close the idle air mixture screw you may have a vacuum leak somewhere.
|
|
|