The Ford Barn - View Single Post

PC/SR · 09-04-2022, 10:52 AM

You have to give the pistons to the machinist and have him bore to fit, to do it right. Since you need new pistons anyway, I would forget the .080 bore that may or may not be right, get .100 over and start there and get it right.

09-04-2022, 10:52 AM	#8
PC/SR Senior Member Join Date: May 2010 Location: Santa Rosa, CA Posts: 1,282	Re: Piston Question You have to give the pistons to the machinist and have him bore to fit, to do it right. Since you need new pistons anyway, I would forget the .080 bore that may or may not be right, get .100 over and start there and get it right.