The Ford Barn - View Single Post - In case you want to know the whole story, or an update

Terry Burtz, Calif · 09-03-2022, 11:46 PM

Please stop posting on this thread.

We agree with Paul Shinn that his 2 "New Engine Kits" may be out of tolerance and have problems.

Please give Paul a break and allow him and his engine builder, Willie, to measure the dimensions in question and post them on this forum.

I will respond with drawing dimensions.

If the measured and drawing dimensions are different, we will have the dimensions measured by a modern machine shop and post the results here.

09-03-2022, 11:46 PM	#36
Terry Burtz, Calif Senior Member Join Date: May 2010 Location: Campbell,CA, USA Posts: 327	Re: In case you want to know the whole story, or an update Please stop posting on this thread. We agree with Paul Shinn that his 2 "New Engine Kits" may be out of tolerance and have problems. Please give Paul a break and allow him and his engine builder, Willie, to measure the dimensions in question and post them on this forum. I will respond with drawing dimensions. If the measured and drawing dimensions are different, we will have the dimensions measured by a modern machine shop and post the results here.