The Ford Barn - View Single Post

tobby · 08-19-2022, 10:39 AM

annealing the copper washers should solve the problem, softening them, heat them red hot, submerge in cold water, be careful don't distort them, and re install......

08-19-2022, 10:39 AM	#3
tobby Member Join Date: Jun 2010 Posts: 47	Re: Master Cylinder Banjo Bolt sealant ? annealing the copper washers should solve the problem, softening them, heat them red hot, submerge in cold water, be careful don't distort them, and re install......