[Dennisfly]

Just purchased a 35, pictures were included in my first post, and the horn doesn't work. The battery is good and I have power to the horn. When I push the horn button there is a click sound at the horn. I removed the horn and disassembled it. Pictures are attached.


I see there is a spring under one end of the bar in picture 2 and the silver screw in picture 3 adjusts tension on the spring. I tried making adjustments and it still doesn't honk.


I measured 6 ohms across the power terminals that powers what looks like a solenoid coil.


Any suggestions on what I should do next are greatly appreciated.