The Ford Barn - View Single Post

[email protected] · 08-12-2022, 08:15 PM

Thanks for the replies. I removed the carb and did a thorough cleaning again. I found the .5 inch passageway under the gasket surface between the recessed area for the idle
jet and the recessed area for the gas bowl stopped up. I hope this was the issue. Thanks everyone.

08-12-2022, 08:15 PM	#10
[email protected] Junior Member Join Date: Jun 2021 Posts: 7	Re: Zenith 1 Carb Question Thanks for the replies. I removed the carb and did a thorough cleaning again. I found the .5 inch passageway under the gasket surface between the recessed area for the idle jet and the recessed area for the gas bowl stopped up. I hope this was the issue. Thanks everyone.