The Ford Barn - View Single Post

Jim Brierley · 07-27-2022, 10:46 AM

Machine the carrier. Remove the Y yoke for the diff gears, reassemble, turn down so there is about a 1/8" flat spot in the bolts, grind the ends of yoke to fit, all will be fine.

07-27-2022, 10:46 AM	#7
Jim Brierley Senior Member Join Date: Jun 2010 Location: Temecula, CA Posts: 4,321	Re: Halibrand 101 question Machine the carrier. Remove the Y yoke for the diff gears, reassemble, turn down so there is about a 1/8" flat spot in the bolts, grind the ends of yoke to fit, all will be fine.