[rockfla]

I have not BUT the end result is "just" about all the different pullers work as advertised. The only thing I would do, after looking at it (and its my personal thought on this type puller) is I would thread the nut back on the axle just about flush with the end and maybe put a washer on top of the nut to use as a buffer between the puller and the axle end just as insurance against damaging the axle end/Threads. Might be overkilll or a waste of time BUT it only takes a minute of caution. The one I bought has a "push nut" (for lack of a better term) that threads onto the axle to push (or pull) against for just the above reason, I liked that featured. JMO. Good luck