The Ford Barn - View Single Post

Mart · 06-02-2022, 04:11 AM

I had a problem where the clutch disc was touching the flywheel bolts. If the flywheel were resurfaced it would make that worse.
Take too much off and you might get then same problem.
I don't know how much is too much.

06-02-2022, 04:11 AM	#3
Mart Senior Member Join Date: May 2010 Location: Solihull, England. Posts: 9,240	Re: Flywheel limits I had a problem where the clutch disc was touching the flywheel bolts. If the flywheel were resurfaced it would make that worse. Take too much off and you might get then same problem. I don't know how much is too much.