Re: Self sealing pan gaskets
I used the plastic devices that screw into the bolt holes in the engine and have catches that hold the pan in place. See https://www.snydersantiqueauto.com/p...8874&cat=41753. I then use my floor jack with a block of wood to push the pan in place and start installing the bolts.
Next time I did it the engine was upside down in an engine stand. Much easier.
__________________
A is for apple, green as the sky.
Step on the gas, for tomorrow I die.
Forget the brakes, they really don't work.
The clutch always sticks, and starts with a jerk.
My car grows red hair, and flies through the air.
Driving's a blast, a blast from the past.
Last edited by nkaminar; 04-17-2022 at 07:19 AM.
Reason: fix typo
|