View Single Post
Old 04-10-2022, 08:33 AM   #14
eagle
Senior Member
 
eagle's Avatar
 
Join Date: Aug 2011
Location: Eagle Bend, MN
Posts: 2,085
Default Re: Sears Marvel 2405

If the float level is adjusted properly, none of the carbs should die after hard braking. As others have said, if it has this tendency you can open the GAV a bit to help, but I would pull the carb off and adjust it properly. Another thing that people do to compensate for this is increase the idle speed with the hand throttle. This also has adverse affects on the shifting ease. Low idle speeds makes a much smoother shift.
__________________
"There are some that can destroy an anvil with a teaspoon and shouldn't be allowed to touch anything resembling a tool."
eagle is offline   Reply With Quote