The Ford Barn - View Single Post - '32 vs '33-34 brake questions

svm99 · 04-07-2022, 12:05 PM

Yes, all parts are the same, most carry "B" part numbers except the brake rods and crosshaft unit on the crossmember which are different '32 to '33/'34.

As a side note Ford did change the grease fitting size on late '34 spindles from 1/8" NPT to 1/4"-28 thread for some reason, therefore a "40-" part number was assigned, otherwise interchangeable with '32 & '33 spindles.

Hope this helps. Paul J.

04-07-2022, 12:05 PM	#2
svm99 Senior Member Join Date: May 2010 Location: Garlic Country of CA Posts: 566	Re: '32 vs '33-34 brake questions Yes, all parts are the same, most carry "B" part numbers except the brake rods and crosshaft unit on the crossmember which are different '32 to '33/'34. As a side note Ford did change the grease fitting size on late '34 spindles from 1/8" NPT to 1/4"-28 thread for some reason, therefore a "40-" part number was assigned, otherwise interchangeable with '32 & '33 spindles. Hope this helps. Paul J.