Quote:
Originally Posted by GB SISSON
Well, this is quite timely for me. About 5 minutes ago I had made up the battery cables and put a 12v battery (and negative grounded)in my newly fabricated battery tray. I had the solenoid with a button (looks like a repro style of original) mounted to the firewall. The small terminal on the solenoid is labled 'battery'. I jumpered a hot wire from the battery positive terminal to that small post and nothing. I then jumped a wire from the grounded chassis and off she spun. I know very little of electrons and such so it is all trial and error with me. I guess I will keep it this way.
|
Trying to wire a remote switch on my 36 with a floor starter button. Sounds like I need to alligator clip the negative wire to the battery side of solenoid and attach the other clip to the positive ground (frame). Is this right?