The Ford Barn - View Single Post

40cpe · 03-15-2022, 11:04 AM

A number of years ago I installed the long upper mounting stud in my '38. It does go all the way through the cross member. A larger hole is drilled in the rear face of the crossmember to insert the stud into, and a smaller hole is drilled into the front face to accept the smaller stud. It has been a while and I don't remember the details but I can take a look. I have since returned to original shocks so the studs are there "just in case".

03-15-2022, 11:04 AM	#3
40cpe Senior Member Join Date: May 2010 Location: Star, MS Posts: 4,161	Re: Rear shock mount studs A number of years ago I installed the long upper mounting stud in my '38. It does go all the way through the cross member. A larger hole is drilled in the rear face of the crossmember to insert the stud into, and a smaller hole is drilled into the front face to accept the smaller stud. It has been a while and I don't remember the details but I can take a look. I have since returned to original shocks so the studs are there "just in case".