The Ford Barn - View Single Post

WallaceHardware · 02-12-2022, 10:06 AM

We do have glass and I have checked the one side opposite from the one with the float attached and it is most definitely not flat, I cannot easily check the other side as there is a fixed piece that protrudes from the mating surface, but how would I go about resurfacing these pieces?

02-12-2022, 10:06 AM	#7
WallaceHardware Junior Member Join Date: Feb 2022 Posts: 17	Re: Carburetor mating surfaces We do have glass and I have checked the one side opposite from the one with the float attached and it is most definitely not flat, I cannot easily check the other side as there is a fixed piece that protrudes from the mating surface, but how would I go about resurfacing these pieces?