The Ford Barn - View Single Post

chuck stevens · 02-10-2022, 08:34 AM

knock the rivets out of the lower control arm, spring mounts, put a one inch spacer in, replace the stock bolts with grade 8 she'll be low. And it is totally reversable and easy. The lowering block can be aluminum or steel, 1" by 1 1/4" , kinda old fashion but it works.

02-10-2022, 08:34 AM	#28
chuck stevens Senior Member Join Date: May 2010 Location: upstate new york Posts: 758	Re: Flipped uprights '49 Club Coupe knock the rivets out of the lower control arm, spring mounts, put a one inch spacer in, replace the stock bolts with grade 8 she'll be low. And it is totally reversable and easy. The lowering block can be aluminum or steel, 1" by 1 1/4" , kinda old fashion but it works.