The Ford Barn - View Single Post

ssffnomad · 12-27-2021, 06:33 PM

First off , I am not sure if my pictures are politically correct here at the Barn ?
Purchased this past year. FH and 3spd where rebuilt not many miles ago. Suspension rebuilt , lowered . I changed the front spring and raised the front 1 3/4”. It goes good. Fun to drive.

Wiring harness is bad, really bad. I just received a complete new Cloth 12V harness from Bauer Electronic, Chris Olsen. Very nice product. Got the Dash out today.
Questions:

Window Crank, when closing at the end of travel. Gear wants to slip. Think I have located and new gear. Do you guy use new Rivets on gear , or bolts ?

Dome light wires. Glove box, up A post to switch on B post . And light to light across the roof. Have you guys been successful in snaking / pulling new wires with Headliner in ?

T/Y. Stretch

12-27-2021, 06:33 PM	#3
ssffnomad Senior Member Join Date: Aug 2021 Location: Upstate N.Y. Posts: 578	Re: 1939’ Deluxe 2DR Sedan First off , I am not sure if my pictures are politically correct here at the Barn ? Purchased this past year. FH and 3spd where rebuilt not many miles ago. Suspension rebuilt , lowered . I changed the front spring and raised the front 1 3/4”. It goes good. Fun to drive. Wiring harness is bad, really bad. I just received a complete new Cloth 12V harness from Bauer Electronic, Chris Olsen. Very nice product. Got the Dash out today. Questions: Window Crank, when closing at the end of travel. Gear wants to slip. Think I have located and new gear. Do you guy use new Rivets on gear , or bolts ? Dome light wires. Glove box, up A post to switch on B post . And light to light across the roof. Have you guys been successful in snaking / pulling new wires with Headliner in ? T/Y. Stretch Last edited by ssffnomad; 12-27-2021 at 07:10 PM.