The Ford Barn - View Single Post

rotorwrench · 12-09-2021, 08:50 AM

If it's a bare block, inspect the old crank and see if it has main journal sizes that will work with the replacement block. This stuff has to have good clearances to work otherwise it will need the block babbitt reworked.

12-09-2021, 08:50 AM	#8
rotorwrench Senior Member Join Date: Jun 2010 Location: San Antonio, Texas Posts: 18,012	Re: New Block If it's a bare block, inspect the old crank and see if it has main journal sizes that will work with the replacement block. This stuff has to have good clearances to work otherwise it will need the block babbitt reworked.