The Ford Barn - View Single Post - Generator mounting bracket and bolt for Power House

old ugly · 11-02-2021, 08:22 PM

mine is all apart so i can't give you a photo.
all that is needed is the 1/2" bolt and nut to go through the generator bracket and the engine generator mount bracket which is part of the engine. that's it. the bolt cinches the generator to the motor.

an adjusting bracket is used from a front timing cover bolt to the side of the generator. although i ran mine for a long time with no adjusting bracket, it was just the bottom attaching bolt cinched tight. it never came loose on me.

11-02-2021, 08:22 PM	#2
old ugly Senior Member Join Date: Aug 2021 Location: alberta canada Posts: 865	Re: Generator mounting bracket and bolt for Power House mine is all apart so i can't give you a photo. all that is needed is the 1/2" bolt and nut to go through the generator bracket and the engine generator mount bracket which is part of the engine. that's it. the bolt cinches the generator to the motor. an adjusting bracket is used from a front timing cover bolt to the side of the generator. although i ran mine for a long time with no adjusting bracket, it was just the bottom attaching bolt cinched tight. it never came loose on me. __________________ old ugly my mom would have told me. "these things are here to test us"