The Ford Barn - View Single Post

tubman · 09-07-2021, 12:03 PM

It is an "L"-shaped bracket about 1 1/2" long on one side and about 1" on the other and about 1/2" wide. One end bolts under the head of one of the long starter mounting bolts and the other under an oil pan bolt. Back in the day, a lot of them were left out when work was done on the starter. I think I may have a spare or two if you have trouble finding one.

09-07-2021, 12:03 PM	#5
tubman Senior Member Join Date: Dec 2013 Location: Minnesota, Florida Keys Posts: 10,434	Re: ford 47 pickup starter alignment problem It is an "L"-shaped bracket about 1 1/2" long on one side and about 1" on the other and about 1/2" wide. One end bolts under the head of one of the long starter mounting bolts and the other under an oil pan bolt. Back in the day, a lot of them were left out when work was done on the starter. I think I may have a spare or two if you have trouble finding one.