On a Starter Side Note: Awhile ago we were discussing rebuilt 12V Ford starters that could be used to switch/swap parts from a 6V unit to create a 12V starter. So, I bought the part number RAY 2449609 from NAPA, swapped in a good 6V armature, front bearing plate and bendix from a 6V starter and had a perfectly running 12V starter for roughly $75. I've used it on the stand a few times - works perfectly.
Of course it was "Frankensteined" together by me - (built from 2 starters) - but for the price, it worked out well.
Note: Make sure you have the right 6V donor starter before you head down this road - you need the one with the short front bearing plate (about 3/8" thick).
IMG_9030.jpg