The Ford Barn - View Single Post

Gary Duff · 05-06-2011, 05:32 PM

36tbird
I use a boring head in the mill. (the tool advances with every rev of the head)
Toolbit is ground per the O-ring bible.
Gary

05-06-2011, 05:32 PM	#19
Gary Duff Junior Member Join Date: May 2010 Posts: 23	Re: 1940 Transmission leak 36tbird I use a boring head in the mill. (the tool advances with every rev of the head) Toolbit is ground per the O-ring bible. Gary