The Ford Barn - View Single Post

Lawson Cox · 07-09-2021, 03:17 PM

Thanks, bbrocksr, Yoyodyne, and 19Fordy for the comments. I was able to borrow a Litchfield spreader, but unfortunately, it was not a complete spreader as it was missing the shorter piece and therefore about 1/8" too long, and wouldn't work for me. I'm gonna just go ahead and spring for (no pun intended) for a new Porta Power from Harbour Freight and let my heirs figure out what to do with it. LOL

Y'all have really been a big help with this, and I really appreciate your putting up with me again. Thanks.

Until the next problem arises, I'll still be lurking hereabouts.

Lawson

07-09-2021, 03:17 PM	#35
Lawson Cox Senior Member Join Date: May 2010 Location: Above the gnat line in Georgia Posts: 7,119	Re: KR Wilson spring spreader Thanks, bbrocksr, Yoyodyne, and 19Fordy for the comments. I was able to borrow a Litchfield spreader, but unfortunately, it was not a complete spreader as it was missing the shorter piece and therefore about 1/8" too long, and wouldn't work for me. I'm gonna just go ahead and spring for (no pun intended) for a new Porta Power from Harbour Freight and let my heirs figure out what to do with it. LOL Y'all have really been a big help with this, and I really appreciate your putting up with me again. Thanks. Until the next problem arises, I'll still be lurking hereabouts. Lawson __________________ Life is like a roll of toilet paper. The closer to the end, the faster it goes. It is better to be seen, than viewed. "We sleep safe in our beds because rough men stand ready in the night to visit violence on those who would do us harm".