Sponsored Links (Register now to hide all advertisements)
Quote:
Originally Posted by rotorwrench
The 351C is definitely different than the small block series of engines. It's also heavier. Finding folks that use the 335 series engines in the mid 50s Fords may be a bit more difficult. Most folks just use the small blocks since they are much less expensive to find bells & whistles for.
|
Yes I have found a few, but like Darrell says they are spacing the mounts or modifying the frame mount. I will space them if I have to, but really don't care to modify the frame if I can avoid it. Also if I can't avoid spacers I would prefer to use them at the bottom on the mount rather than at the top.