Re: Wilson Welding backing plates
The issue I have is I want end # 2 (right side) of the hose. to fit 3/16 tube brake line. Notice the short collar on the r. side of hose. . I had a hose house make me up some hoses and they have the long collar so I can't use the horse shoe clips. Male end looks to be flare type. 7/16. It does not seal with the copper washer like the 40's do. That's why I need to figure out what wheel cyls. Bob uses so it can possibly help me get an over the counter hose. One side is okay. Only have an issue on one side due to lack of real estate under the car.
|