The Ford Barn - View Single Post

onedon · 05-14-2021, 02:18 PM

Thanks TJ I got it out that way but I 'm not sure it is correct. The glass is rectangular shape and you can't turn it or rotate it. I finally bent the bead molding out towards the inside of the car and got it out, pretty tight, not sure I will get it back in. You can't go clear down because it angles into the inner door skin and hits it. It has suicide doors on the back. Any other help would be appreciated.

05-14-2021, 02:18 PM	#3
onedon Member Join Date: May 2018 Posts: 34	Re: replaceing rear doorglass 37 ford Thanks TJ I got it out that way but I 'm not sure it is correct. The glass is rectangular shape and you can't turn it or rotate it. I finally bent the bead molding out towards the inside of the car and got it out, pretty tight, not sure I will get it back in. You can't go clear down because it angles into the inner door skin and hits it. It has suicide doors on the back. Any other help would be appreciated.