[TJ]

Not sure if 37 is the same as a '40, but you need to first remove the window garnish molding. Second remove the door panel. You now have access to the window regulator bolts that hold the regulator to the door. Remove the bolts(screws) while reaching inside the door to hold up the glass and regulator from suddenly falling. Lower the window and regulator to the bottom of the door. Slide the regulator off the track that hold the glass and pull out the regulator through the door opening. If the door opening is big enough you can remove the window via this opening. If not the window will have to come out through the top opening. Tip the glass 90 degrees and pull out through the top opening.