The Ford Barn - View Single Post - Zenith carb overfloating at Choke GAV

Michael_Velling · 04-24-2021, 01:16 AM

The thread is okay and not destroyed. Around the casting and the GAV Assembly is everything okay. The fuel is coming from the float bowl through the small hole in the bottom of the bowl to the GAV Needle and then up in the tube. If i screw in the Needle complete there is no leaking. But then the car dont runs.

04-24-2021, 01:16 AM	#5
Michael_Velling Member Join Date: Jan 2020 Location: Germany Posts: 33	Re: Zenith carb overfloating at Choke GAV - why? The thread is okay and not destroyed. Around the casting and the GAV Assembly is everything okay. The fuel is coming from the float bowl through the small hole in the bottom of the bowl to the GAV Needle and then up in the tube. If i screw in the Needle complete there is no leaking. But then the car dont runs. __________________ Greetings Michael ------ Toenisvorst, Germany