Quote:
Originally Posted by 19Fordy
Rockfla:
Since you already have the canister, use it by using 1/4 in. steel fuel line with a loop in it to absorb any vibration. A flathead engine is solidly mounted and doesn't "rock and roll" so as to create a problem. Or, use a filter that bolts to the head bolts/ studs. They are plentiful. Also, you could leave the filter canister you already have on the firewall but, install a rubber pad under it to absorb vibration. Those OEM filters do work well.
Another idea is to modify the Fram filter by adding a 3 hole base from an old Ford OEM canister. It would be easy to do if you have access to a welder.
|
Thanks for the info.......3 hole base???? I was thinking about see "IF" i could change the 90* elbow on the bottom to something more "friendly" and easier to find.....BUT I maybe look at the "coiling" of a "hard" line OR maybe trying to see since the "original" line/Look is not an option them maybe something out of a SS braided line.