The Ford Barn - View Single Post

markdtn · 04-22-2021, 09:04 AM

You could make it out of steel tubing (fuel line). Both ends are fixed so should be OK. It's short so tight bends are difficult would be the hardest part.

04-22-2021, 09:04 AM	#2
markdtn Senior Member Join Date: Jun 2016 Location: Chattanooga, TN Posts: 192	Re: Fram oil supply line suggestions You could make it out of steel tubing (fuel line). Both ends are fixed so should be OK. It's short so tight bends are difficult would be the hardest part.