The Ford Barn - View Single Post - Dual chamber master cylinder for drum brakes

fordor41 · 03-10-2021, 11:16 PM

I would think a 70's Mustang would work. just make sure bore is same diameter. If you have a non-power M/C now, stick with non-power M/C as the pocket in the cylinders are different between power and non-power.I don't know why a dual M/C for disc in the front wouldn't work if that's all you can find. may want to add a 10# residual in the front(disc take 2#)as some dual drum/disc M/c's have internal residual valves (2# &10#) and would have wrong RPV for front drums

03-10-2021, 11:16 PM	#2
fordor41 Senior Member Join Date: Oct 2011 Location: elmira,ny Posts: 1,576	Re: Dual chamber master cylinder for drum brakes I would think a 70's Mustang would work. just make sure bore is same diameter. If you have a non-power M/C now, stick with non-power M/C as the pocket in the cylinders are different between power and non-power.I don't know why a dual M/C for disc in the front wouldn't work if that's all you can find. may want to add a 10# residual in the front(disc take 2#)as some dual drum/disc M/c's have internal residual valves (2# &10#) and would have wrong RPV for front drums