The Ford Barn - View Single Post

mrlaser · 03-07-2021, 12:27 PM

The following is an email that I sent to Charlie after he restored my previously "restored 94" which had been done by another very large early Ford parts supplier but never functioned properly.

You probably don't need any more positive feedback, but I must tell you that my engine ran perfectly (right out of the box) with the carburetor that you recently rebuilt for me, with no additional adjustments. The idle is spot on and there is no more stalling when coming to a stop. As I mentioned previously, I had sent my original carburetor to ......... for a rebuild. While it looked amazing when it was returned, no amount of "adjusting" resulted in a smooth idle or correction of the stalling issues. If it isn't too much trouble, would you let me know what was required to restore the proper function? Thank you for your excellent service.

03-07-2021, 12:27 PM	#3
mrlaser Senior Member Join Date: Sep 2019 Location: Savannah, Ga Posts: 238	Re: Charlie stolded.....my version The following is an email that I sent to Charlie after he restored my previously "restored 94" which had been done by another very large early Ford parts supplier but never functioned properly. You probably don't need any more positive feedback, but I must tell you that my engine ran perfectly (right out of the box) with the carburetor that you recently rebuilt for me, with no additional adjustments. The idle is spot on and there is no more stalling when coming to a stop. As I mentioned previously, I had sent my original carburetor to ......... for a rebuild. While it looked amazing when it was returned, no amount of "adjusting" resulted in a smooth idle or correction of the stalling issues. If it isn't too much trouble, would you let me know what was required to restore the proper function? Thank you for your excellent service.