The Ford Barn - View Single Post

rotorwrench · 03-05-2021, 02:31 PM

8M-16783 is the left side support assembly and the farther to the rear link & bracket assembly is P/N 8M-16797 for the left side. The support is what has the big spring on it. All of these parts constitute a hinge assembly for the left side. The 1949 thru 51 Mercs all use the same stuff.

Check the usual flea-pay then check the swap meet section and also check over on the HAMB market place. It's salvage yards and related club affiliates from there.

03-05-2021, 02:31 PM	#3
rotorwrench Senior Member Join Date: Jun 2010 Location: San Antonio, Texas Posts: 18,010	Re: 1950 Mercury Hood Hinges 8M-16783 is the left side support assembly and the farther to the rear link & bracket assembly is P/N 8M-16797 for the left side. The support is what has the big spring on it. All of these parts constitute a hinge assembly for the left side. The 1949 thru 51 Mercs all use the same stuff. Check the usual flea-pay then check the swap meet section and also check over on the HAMB market place. It's salvage yards and related club affiliates from there.