The Ford Barn - View Single Post

OldGold360 · 01-30-2021, 09:16 PM

I got the center holes to work, but the outside bed tin mounting holes will have to be redone, as well as 4 of the bed to frame mounting holes. Two of the bed to frame mounting holes were off by a little more than 3/8”. There is no way this would have mounted to the frame.

There really are no other good options, but between my Mack Hils bed wood and bed tin, I’m not impressed. Next time I will make what I need. You might have better luck than those of us who have had issues. Some folks are happy with them, but they seem to be the guys who buy complete beds... but those aren’t Ford beds.

01-30-2021, 09:16 PM	#24
OldGold360 Senior Member Join Date: Nov 2020 Location: SW WA Posts: 700	Re: Mack hills bed for a 34 I got the center holes to work, but the outside bed tin mounting holes will have to be redone, as well as 4 of the bed to frame mounting holes. Two of the bed to frame mounting holes were off by a little more than 3/8”. There is no way this would have mounted to the frame. There really are no other good options, but between my Mack Hils bed wood and bed tin, I’m not impressed. Next time I will make what I need. You might have better luck than those of us who have had issues. Some folks are happy with them, but they seem to be the guys who buy complete beds... but those aren’t Ford beds.