The Ford Barn - View Single Post - Early '28 Model A

700rpm · 01-16-2021, 10:10 PM

Early ‘28 hoods had an upper slant to the top of the louvers that were not parallel to the hood hinge. Lacing on the radiator shell was threaded into holes in the shell. Most had shrouds on the radiator. Lug nuts were a different shape than later. Air in the tires was cleaner.

01-16-2021, 10:10 PM	#5
700rpm Senior Member Join Date: May 2010 Location: Portland, Oregon Posts: 6,039	Re: Early '28 Model A - possible AR? Early ‘28 hoods had an upper slant to the top of the louvers that were not parallel to the hood hinge. Lacing on the radiator shell was threaded into holes in the shell. Most had shrouds on the radiator. Lug nuts were a different shape than later. Air in the tires was cleaner. __________________ Ray Horton, Portland, OR As you go through life, keep your eye on the donut, not the hole.