The Ford Barn - View Single Post

51504bat · 01-04-2021, 09:46 AM

One other option is to fab some metal plate that bolts to the stock car pumps and then bends to horizontal to allow you to use stock rubber biscuit mounts. The PO of my '39 p/u did that but I removed them and went with the OCM pumps I referred to in my previous post. Sorry no longer have them or photos. Fabbing the plate to make the car pumps mount like a truck pump might be the easiest solution so you don't have to change pulleys or source Merc OCM pumps.

01-04-2021, 09:46 AM	#5
51504bat Senior Member Join Date: Sep 2013 Location: SoCal-Redlands Posts: 3,561	Re: 53’ 239 Flathead Water Pump Mounts One other option is to fab some metal plate that bolts to the stock car pumps and then bends to horizontal to allow you to use stock rubber biscuit mounts. The PO of my '39 p/u did that but I removed them and went with the OCM pumps I referred to in my previous post. Sorry no longer have them or photos. Fabbing the plate to make the car pumps mount like a truck pump might be the easiest solution so you don't have to change pulleys or source Merc OCM pumps. __________________ Making the simple complicated for over 30 years.