The Ford Barn - View Single Post - '40 Trunk seal 91A-7243720

russcc · 01-03-2021, 09:45 AM

Thank you again 19Fordy. 1st, it looks like the new seal I have is different than the one you used, as it fits as is without having to cut and glue, and has bonded corners. Also, in the 6th picture looking at the driver's side from inside the trunk area that the fat part of the seal is below the flange, and the thin side of seal sets on top of the flange. Please correct me if am wrong. If so, that's how the seal from DC fits. Also, the restorer told me to use 3M black weatherstrip adhesive.

01-03-2021, 09:45 AM	#7
russcc Senior Member Join Date: May 2010 Posts: 2,871	Re: '40 Trunk seal 91A-7243720 Thank you again 19Fordy. 1st, it looks like the new seal I have is different than the one you used, as it fits as is without having to cut and glue, and has bonded corners. Also, in the 6th picture looking at the driver's side from inside the trunk area that the fat part of the seal is below the flange, and the thin side of seal sets on top of the flange. Please correct me if am wrong. If so, that's how the seal from DC fits. Also, the restorer told me to use 3M black weatherstrip adhesive.