View Single Post
Old 12-13-2020, 09:32 AM   #3
redmodelt
Senior Member
 
redmodelt's Avatar
 
Join Date: May 2010
Location: Portland OR
Posts: 6,358
Default Re: Distributor question

There is an oiler on the distributor or get the drilled upper shaft, so it can be lubed in service, you should not need a grease that last. I wipe a little grease on the shaft when assembling the distributor, using the same grease as used on the chassis. If it is going back on a running car, oil should work too.
__________________
I know the voices aren't real but damn they have some good ideas!
redmodelt is offline   Reply With Quote