Re: Bolt sizes for pressure plate and bell housing
That shoulder is very important.... And it could be same diameter as the unthreaded area of a regular bolt. But in a HD truck like an F250 in granny gear with a load, and dump the clutch heading uphill, think of the shear on those 6 rather small bolts!
__________________
Owner/Operator of 'Jailbar Ranch' on the side of Mt. Pickett. Current stable consists of 1946 1/2 ton pickup turned woodie wagon with FH V8, 1946 Tonner Pickup with 226 H six, 1979 Toyota landcruiser wagon, now wearing 1947 Ford Jailbar sheet metal. 'Rusty ol' floorboards, hot on their feet' (Alan Jackson)
Last edited by GB SISSON; 12-11-2020 at 08:11 PM.
|