Quote:
Originally Posted by caf
Anyone have any clever ideas on ways they hung there fat fenders for spraying..I have some square stock was going to weld some thing up off this dolly,,,,thanks ahead
|
I made a pair of "saw horses". They are taller than a typical saw horse and have a pair of curved boards on each end to hold the fender securely.
I (first) paint the insides of the fenders by placing them in a common paint rack. Once they dry and I have wet sanded and buffed the insides, I tape up (insides) and place them on the horses.
Repeat
I can get you a photo tomorrow if you like.
I should have thought of these years ago as they have made my life much easier.