The Ford Barn - View Single Post

Barry WNY · 04-19-2011, 04:59 AM

I would be looking for a complete reared, go through a matching unit and when ready swap it out. That way there is not so much pressure on the job. You have a few years there not much change car or truck. 3.78 are common I use it and am happy with it but I don't go over 55. A good used rear would cost about half a new ring & pinion, all the new goodies to go with it will cost the other half.

04-19-2011, 04:59 AM	#2
Barry WNY Senior Member Join Date: May 2010 Location: Sinclairville NY Posts: 230	Re: 40 pick up trans, gears I would be looking for a complete reared, go through a matching unit and when ready swap it out. That way there is not so much pressure on the job. You have a few years there not much change car or truck. 3.78 are common I use it and am happy with it but I don't go over 55. A good used rear would cost about half a new ring & pinion, all the new goodies to go with it will cost the other half.