Quote:
Originally Posted by billybronco1
So I am back on this thermostat thing. Today after a 15 mile run she was only running at about 130 degrees. Temp outside was about 65. Before I buy therms I was wondering if I should use 160 or 180 degree? Also I'm concerned on the diameter of these traditional therm will they fit in the hoses? I found this one on Macs, unless some has a part number available will this fit?
|
I'm was sure I posted on this already!!! 180 at a minimum. You can get the thermostats at any auto parts store. See post #26 of this thread, the first link post #2 list the part number.
"The Subaru Justy is what is commonly referenced, but the same thermostats are used in several different makes, models and years. The normal reference you will see is Subaru Justy 1990. They have to be retain someway. You can use wires that catch under the hoses and clamps. Or you can double clamp them (an extra champ just above where the thermostat is in the hose). There are several other methods to retain them."
Stant 14157 is a 170 deg
AC DELCO 12T4D 19114436 180 deg
NAPA THM115 180 deg