View Single Post
Old 10-08-2020, 06:41 PM   #2
TJ
Senior Member
 
TJ's Avatar
 
Join Date: May 2010
Location: Napa,California
Posts: 6,773
Default Re: Dope trying to dope out a signal light issue

Good clean grounds first. For some reason I have found that the 41-48 cars definitely need really good clean grounds. I have even added a ground strap to the housing stud that protrudes into the back side of the fender. If you have a stock wiring harness also check all the bullet connectors at the back . Take them apart and clean them with sand paper and a round file in the tube encased in the rubber.
TJ is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)