I used the stock bypass filter cannister and then housed a full-flow 100% filtration system inside of it. Keep in mind that I have a specially modified oil-pump that is blocked off on the internal passages and sends 100% of the oil out the side of my oil pan, then through the filter and then to the main oil galley. My goal on the filter was to create something that would look stock, yet allow me to hide a full-flow filter inside of it. Very few folks can look at it and decipher that it is not a stock setup.
2015-07-08 21.24.16 copy.jpg
2015-07-09 01.23.05 copy.jpg
2015-07-09 01.23.18 copy.jpg
2015-07-09 18.41.58 copy.jpg
2015-07-09 22.09.11 copy.jpg
2016-07-11 10.23.38 copy.jpg
2015-11-08 12.55.09 copy.jpg
ClevelandAutorama-Engine copy2.jpg