The Ford Barn - View Single Post

Step-down · 07-08-2020, 05:29 AM

Couple more question
Do you have hi lift cam , do the piston pop up at TDC . I would grease up the top of the valves and piston and place head on top loosely and roll engine over by hand checking for hi spots
Who’s piston ,some dome are taller .180 to .220 .8BA heads have been milled , try another set of heads for mock up .

07-08-2020, 05:29 AM	#9
Step-down Senior Member Join Date: May 2012 Location: Hat City (Danbury CT) Posts: 647	Re: 8ba block decking Couple more question Do you have hi lift cam , do the piston pop up at TDC . I would grease up the top of the valves and piston and place head on top loosely and roll engine over by hand checking for hi spots Who’s piston ,some dome are taller .180 to .220 .8BA heads have been milled , try another set of heads for mock up . __________________ "I can't cry as long as I know the Lord has risen "