View Single Post
Old 06-30-2020, 11:46 AM   #4
V8COOPMAN
Senior Member
 
V8COOPMAN's Avatar
 
Join Date: May 2010
Location: East Shore of LAKE HOUSTON
Posts: 11,184
Default Re: 46 pick up 1/2 or 3/4 ton?

Quote:
Originally Posted by oldford2 View Post
Thanks Coop, sounds like good info and you answered my questions. but you got me worried a bit. It has been registered for the last 30 years as a 46. I don't think the RMV cops will find out so mum's the word.
Thanks again
John

Well, since this one WAS an early-production vehicle, I guess we can ASSUME that it was possibly sold sometime in later 1946. We know that SOME municipalities registered NEW vehicles as "current" year of sale, rather than actual "MODEL" year.


You should remember that the vehicle serial numbers originated when first stamped into the pad on the upper bell of the transmissions when the engine and transmission were first married. Those engine/trans combos were then shipped to a vehicle assembly plant. When the engine/trans was installed in a chassis, Bubba hand-stamped the serial number found on the transmission into the chassis rail, or other appropriate vehicle surface. So, that "7" in "799" indicates that that engine/trans was destined for a "1947" vehicle. I'LL NEVER TELL! DD
__________________
Click Links Below __


'35-'36 W/8BA & MECHANICAL FAN


T5 W/TORQUE TUBE
V8COOPMAN is offline   Reply With Quote