The Ford Barn - View Single Post

Russ/40 · 05-31-2010, 11:19 AM

The best solution is to drill a 1/8" hole as low as possible in the boss that the lifter rides in. You then put an allen wrench or such into the hole to hold the lifter from turning. Of course the engine needs to be stripped to do this. Otherwise, buy the "Johnson" tools from one of the major suppliers.

05-31-2010, 11:19 AM	#2
Russ/40 Senior Member Join Date: May 2010 Location: Santee, California Posts: 3,505	Re: Adjustable lifters The best solution is to drill a 1/8" hole as low as possible in the boss that the lifter rides in. You then put an allen wrench or such into the hole to hold the lifter from turning. Of course the engine needs to be stripped to do this. Otherwise, buy the "Johnson" tools from one of the major suppliers.