View Single Post
Old 05-12-2020, 12:29 PM   #37
grumppyoldman
Senior Member
 
grumppyoldman's Avatar
 
Join Date: Apr 2017
Location: Texas Gulf Coast
Posts: 727
Default Re: Ignition problem no spark

the Flamethrower dist. was in the car when I bought it. It ran good until the module went out, I think when I get the wiring fixed it will do ok. The coil had too many wires connected to the pos. terminal which may have lowered the voltage requirements for the unit, it has to have 12 volts to work properly.Al
grumppyoldman is offline   Reply With Quote