The Ford Barn - View Single Post

flatheadmurre · 04-16-2020, 10:35 AM

If you´re going to put it in a 21-stud with 68 bearings that crank has to have a date with the lathe first and then the crankshaft grinder...
You stated it´s ground to 2" on the rods...if it´s stroked you will have to check for clearance rod to block to...

04-16-2020, 10:35 AM	#5
flatheadmurre Senior Member Join Date: Apr 2015 Location: Sweden Posts: 3,045	Re: 24 stud crankshaft in a 21 stud engine If you´re going to put it in a 21-stud with 68 bearings that crank has to have a date with the lathe first and then the crankshaft grinder... You stated it´s ground to 2" on the rods...if it´s stroked you will have to check for clearance rod to block to...