Re: Been dabbling in Stainless trim repair
Interesting thread! I've got a piece of stainless trim from the inside door panel of my '48 Tudor that I accidentally bent. I've been unable to find a replacement, so I thought I'd try a repair. My first challenge has been to try to get the backing piece off so I can repair the front. The ends are pinched to keep the backing piece in place. I've tried to get something under that pinched area, but haven't had success yet. I'm afraid I'll damage the ends if I'm too aggressive. Suggestions are welcome! If anyone knows where I could get a replacement piece, please let me know.
Dave
|